(435) 990-7020 Free Estimate
Southern Utah Epoxy Flooring Specialists
Epoxy Flooring in Southern Utah
St. George heat-rated. Cedar City freeze-resistant. Right product for your elevation.
Licensed & Insured
5-Year Warranty
UT Lic #10696814-5501
10+
Years Serving Southern Utah
10,000+
Projects Completed
4.9
Average Rating
10+
Year Longevity
What's Included
Not a Paint Job. A Coating System Built for Southern Utah.
Diamond grind prep, moisture testing, and climate-appropriate materials. These aren't options — they're the standard.

Diamond Grind Preparation

We diamond grind every floor before coating. It opens concrete pores for proper adhesion and reveals moisture, cracks, and contaminants that would cause delamination later.

Moisture Testing

Southern Utah soil conditions contribute to moisture vapor transmission through slabs. We test before coating. If moisture levels are elevated, we apply moisture-mitigation primer first.

Climate-Appropriate System

St. George gets epoxy with heat-rated clear coat. Cedar City gets polyaspartic — UV-stable, salt-resistant, and freeze-thaw resistant. Right product for the elevation and season.

Built for Southern Utah
St. George and Cedar City Are Opposite Epoxy Challenges
  • St. George: morning scheduling, heat-rated topcoat. Early morning installation when slabs are coolest. Heat-rated clear coat prevents hot-tire pickup from summer-baked vehicles.
  • Cedar City: polyaspartic system, May-October install. Salt-resistant, UV-stable, freeze-thaw resistant. We install during the warm season to ensure adequate cure before winter arrives.
  • Diamond-grind prep + moisture testing on every floor. Diamond grinding opens pores for maximum adhesion. Southern Utah soil moisture conditions mean elevated vapor transmission is common — we test after grinding and apply moisture-mitigation primer if levels are elevated.
  • PSI specs matter on pre-install concrete washing. Stucco and masonry areas: 500-800 PSI. Concrete driveways: 1200-1500 PSI. Wrong PSI damages the surface you're trying to clean.

System Benefits

Heat-Rated Topcoat
Road Salt Resistant
Freeze-Thaw Rated
Moisture Vapor Tested
UV Stable Topcoat
Anti-Slip Options
Custom Colors & Flake
Eliminates Concrete Dust
Easy Oil & Chemical Cleanup
10+ Year Longevity
Your Installation
How Southern Utah Epoxy Flooring Works
Most 2-car garages complete in 2 days. Walk on it in 24 hours, park on it in 72 hours.
1

Grind & Test

Diamond grinding opens concrete pores. Moisture vapor emission tested. Cracks filled, existing coatings removed.

2

Moisture Barrier

Installed where needed. Southern Utah soil moisture conditions make this non-negotiable on many St. George and Cedar City slabs.

3

Epoxy Base + Flake

Climate-appropriate epoxy applied at proper mil thickness. Decorative flake broadcast while wet. St. George gets standard epoxy; Cedar City gets polyaspartic.

4

Topcoat

Heat-rated clear coat for St. George. Polyaspartic for Cedar City. Walk on it in 24 hours, park on it in 72 hours.

Project Scope
Southern Utah Epoxy Flooring Packages
Free estimates across Cedar City, St. George, Hurricane, Washington City, and Ivins. Exact pricing depends on square footage, substrate condition, and system selection.

2-Car Garage

Full System Install
  • 400-500 sq ft
  • Diamond grind + moisture test
  • Climate-appropriate epoxy
  • Flake broadcast
  • 5 Year Warranty
Get Your Free Estimate
Most Popular

3-Car / Large Garage

Custom Scope
  • 600+ sq ft
  • Workshops, storage
  • Built for your elevation + use case
  • Cedar City: polyaspartic system
  • 5 Year Warranty
Get Your Free Estimate

Commercial Floors

Priced Per Project
  • Warehouses, showrooms, retail
  • Anti-slip aggregate options
  • After-hours scheduling available
  • Chemical resistance options
  • Heat-rated or freeze-rated as needed
Get Your Free Estimate
Southern Utah Homeowners
What Our Clients Say
Real reviews from Southern Utah homeowners about their garage floor coating experience.
Common Questions
Southern Utah Epoxy Flooring FAQ
Straight answers to what Southern Utah homeowners ask most about garage floor coatings.
Can you install epoxy garage flooring in St. George during summer?
Yes, with morning scheduling. St. George garage slab temperatures can exceed 100°F in summer afternoon heat, and epoxy applied to an overheated slab flashes off too quickly and doesn't bond properly. We schedule summer projects for early morning starts when the slab is at its coolest.
What about Cedar City winters — can epoxy handle the freeze-thaw and road salt?
Standard epoxy is not the right system for Cedar City garages. Freeze-thaw thermal cycling and road salt both degrade standard epoxy. We use polyaspartic topcoats for Cedar City. Polyaspartic is UV-stable, salt-resistant, and handles thermal cycling significantly better. We install May through October.
Why is a diamond grind and moisture test mandatory before installation?
Southern Utah's soil conditions contribute to higher-than-average moisture vapor transmission through concrete slabs. If you apply epoxy over a slab with excessive moisture vapor emission, the coating delaminates. Diamond grinding opens pores for adhesion AND reveals moisture issues. The moisture test tells us if we need moisture-mitigation primer first.
What's the difference between epoxy and polyaspartic?
Standard two-part epoxy is durable and cost-effective but yellows under UV exposure and is not salt or extreme-freeze resistant. Polyaspartic cures faster, is UV-stable, handles thermal cycling and salt exposure better. For St. George, quality epoxy with a polyaspartic topcoat is a good combination. For Cedar City, we lean toward full polyaspartic systems.
How long does epoxy flooring installation take?
Most two-car garages take 2 days. Day 1: diamond grind, moisture test, primer if needed, base coat. Day 2: decorative flake broadcast, clear topcoat. Light foot traffic at 24 hours, vehicle traffic at 72 hours.
What does road salt actually do to epoxy flooring?
Road salt tracked into Cedar City garages is chemically aggressive to standard epoxy — over repeated exposure it softens, discolors, and eventually delaminates the coating. Polyaspartic topcoats have significantly higher chemical resistance to road salt.
Ready for a New Garage Floor in Southern Utah?
Free estimates across Cedar City, St. George, Hurricane, Washington City, and Ivins. Diamond grind, moisture test, right product for your elevation. Call (435) 990-7020.